Find answers online to your Sub-Zero, Wolf, and Cove customer service questions here. Read about Romex Size and Amp Ratings Information for Sub-Zero, Wolf, and Cove Appliances.

See also, Romex Size and Amp Ratings Information. The kW rating helps determine the appropriate wire gauge based on the national electrical code. Wolf only provides electrical specifications for our …

Hardware for mounting the blower to the home and ROMEX cable for connecting the blower power to the ventilation hood is not provided by Wolf. Screws provided with the remote blower are 1/4 -14 x …

Insert 6" (152) Romex® wire through the knockout opening. Secure the Romex® wire to the electrical box with an appropriate connector. Use wire connectors or wire nuts approved by UL or C/UL. Attach …

emote blower wire. Refer t Insert Romex® wire from the in-line or remote blower through the knockout and secure using an approved cord stain relief. the ground screw. Refer t Verify all wires are secure …

Remove the knockout above the in-line/remote blower junction box, then insert the blower electrical supply (Romex®) into the electrical box. Secure the electrical supply to the electrical box with a UL or …

Find answers online to your Sub-Zero, Wolf, and Cove customer service questions here. Read about Dual Fuel (DF) Range Electrical Requirements.

l framing with the wood screws p 7 Lift the hood into position and insert Romex® wire(s) into the electrical knockout and secure with the provided connector. 8 Secure the hood to the mounting strip …

late and into the ceiling framin 7 Install the provided hex head screws through the remaining holes in the hood’s top plate and into the ceiling framing. 8 Insert Romex® wire(s) into the electrical knockout and …

6 Lift the hood into position and insert Romex® wire(s) into the electrical knockout and secure with a UL or C/UL approved connector (not provided). 7 Secure the hood to the wall structure with the provided …