When an electronic component is being inspected by an acoustic microscope, ultrasound is pulsed into the part by the scanning transducer. At any material interface within the part, a portion of the ...

David Kuchta, Ph.D. has 10 years of experience in gardening and has read widely in environmental history and the energy transition. An environmental activist since the 1970s, he is also a historian, ...

What automated soldering methods can be considered for Mini-Circuits surface-mount components? There are two basic methods: reflow and wave soldering. Generally, reflow soldering can be done when (l) ...

When electronic components are mounted onto a printed circuit board, they are subsequently visually inspected to ensure they are mounted correctly. Historically, these boards were photographed with a ...

If you are lucky enough to encounter a piece of homebrew electronics from the 1950s, the chances are that under the covers the components will be assembled on solder tags, each component with long ...

Should folks building small numbers of circuit boards use surface-mount parts, or should they stick with through-hole components that are so much easier to handle and solder (not to mention see)?

Dublin, July 01, 2021 (GLOBE NEWSWIRE) -- The "Head-mounted Display Market with COVID-19 Impact Analysis by Type, Technology (AR, VR), Application (Consumer, Commercial, Enterprise & Industry, ...

[Chuck Stephens] grew up with Radio Shack 100-in-1 electronic kits. The ones with lots of components and spring terminals that could be wired to be a radio, a burglar alarm, or whatever.[Chuck] ...